BNPGN - WINDSOR 90
- MSDS: BNPGN
- Manufacturer: PHILLIPS 66 COMPANY
- Product Name: WINDSOR 90
- National Stock Number: 9150-00N031617
Product Identification
Product ID:WINDSOR 90
MSDS Date:01/01/1987
FSC:9150
NIIN:00N031617
MSDS Number: BNPGN
Responsible Party
BARTLESVILLE, OK 74004
US
Emergency Phone: 918-661-3865; 918-661-8118
Info Phone: 918-661-4400
Cage: 46935
Contractor
Telephone: 800-234-6603
Cage: 46935
Ingredients
HYDROCARBONS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MFR REC EXPOS LIMIT:5 MG/M3 (OIL MIST)
ACUTE:EYE:MILD IRRITATION. SKIN:PRACTICALLY NON-TOXIC BY SKIN
ABSORPTION. MILD IRRITATION WITH PROLONGED OR REPEATED CONTACT.
INHAL:NONE EXPECTED. INGEST:PRACTIC ALLY NON TOXIC.
CHRONIC:CONTINUOUS SKINCONTACT WITH USED MOTOR OILS HAS CAUSED SKIN
CANCER IN LAB (EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:ANIMALS. AVOID PROLONGED SKIN CONTACT
WITH USED MOTOR OIL. PRESSURIZED INJECTION OF PRODUCT UNDER SKIN
CAN LEAD TO SERIOUS INFLAMMED TISSUE. IF LEFT UNTREATED INJURY CAN
BE GANGRENOUS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/RUNNING WATER FOR AT LEAST 15 MIN. IF IRRIT DEV,
SEEK MD ATTN. FOR INJECTION INJURIES, IMMED MED TREATMENT IS REQ.
MD MAY CALL (918)661-4845. SKIN:WASH W/SOAP & WATER. IF IRRIT DEV,
SEEK MD ATTN. FOR INJECTION INJURIES, IMMED MED TREATMENT IS REQ.
MD MAY CALL (918)661-4845. INHAL:REMOVE FROM EXPOS. IF
ILLNESS/ADVERSE SYMPS DEV, SEEK MD ATTN. INGEST:GIVE 2 GLASSES OF
WATER & (SUPDAT)
Fire Fighting
Flash Point Method:COC
Flash Point:>280F,>138C
Extinguishing Media:DRY CHEMICAL, FOAM OR CARBON DIOXIDE.
Fire Fighting Procedures:EVACUATE AREA OF ALL UNNEC PERSONNEL. SHUT OFF
SOURCE, IF POSS. USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER FOG/SPRAY MAY BE USED TO COOL(SUPDAT)
Unusual Fire/Explosion Hazard:CARBON OXIDES AND VARIOUS HYDROCARBONS
FORMED WHEN BURNED.
Accidental Release
Spill Release Procedures:WEAR PROT EQUIP AND/OR GARMENTS DESCRIBED IN
PERSONNEL PROT SECT IF EXPOS CONDTNS WARRANT. SHUT OFF SOURCE, IF
POSS & CONTAIN SPILL. PROT FROM IGNIT. KEEP OUT OF WATER SOURCES &
SEWERS. ABSORB IN DRY, INERT MATL (SAND, CLAY, SAWDUST, ETC)
(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID INHAL OF MIST/EYE CONT. AVOID
RPTD CONT W/SKIN. WEAR PROT EQUIP IF EXPOS CONDTNS WARRANT. LAUNDER
CONTAM CLTHG BEFORE REUSE.
Other Precautions:STORE AWAY FROM IGNITION SOURCES. PROVIDE MEANS OF
CONTROLLIING LEAKS & SPILLS. KEEP CONTAINERS CLOSED. CONTACT
IMMEDIATE SUPERVISOR FOR SPECIFIC INSTRUCTIONS BEFORE WORK IS
INITIATED.
Exposure Controls
Respiratory Protection:NOT GENERALLY REQUIRED. FOR CONCENTRATIONS
EXCEEDING RECOMMENDED EXPOSURE LEVEL, USE NIOSH/MSHA APPROVED AIR
PURIFYING RESPIRATOR.
Ventilation:USE ADEQUATE VENTILATION TO CONTROL EXPOSURE BELOW
RECOMMENDED LEVELS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHERE SPECIAL/UNUSUAL CONDITIONS EXIST, IT
IS SUGGESTED THAT EXPERT ASSIST OF AN INDUSTRIAL HYGIENIST/OTHER
(SUPDAT)
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
SPEC GRAV:0.86-0.94 (H2O = 1). FIRE FIGHT PROC:EXPOSED CONTAINERS AND
EQUIPMENT. FIRST AID PROC:INDUCE VOMITING. IF ILLNESS OR ADVERSE
SYMPTOMS DEVELOP, SEEK MEDICAL ATTENTION. SPILL PROC: TRANSFER TO
DISPOSAL DRUMS. OTHER PROT EQUIP:QUALIFIED PROFESSIONAL BE SOUGHT.
Chemical Properties
HCC:V6
Vapor Pres:<1 @ 20C
Vapor Density:>5
Spec Gravity:(SUPP DATA)
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS TO DARK LIQUID WITH MILD ODOR.
Percent Volatiles by Volume:NEG
Stability
Stability Indicator/Materials to Avoid:YES
O2 AND STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON OXIDES AND VARIOUS HYDROCARBONS
FORMED WHEN BURNING.
Disposal
Waste Disposal Methods:INCINERATE OR OTHERWISE MANAGE AT A PERMITTED
WASTE MANAGEMENT FACILITY. DISPOSAL MUST BE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.